DE2-115 Board

From c7t_wiki


DE2-115 User Manual[edit]

Instructions to install USB Driver[edit]

Configuring the FPGA[edit]

Error: CONF_DONE pin failed to go high[edit]

  • Check the RUN/PROG switch, it must be in the RUN position.

Error: Can't access JTAG chain[edit]

  • Confirm the USB cable is connected to the USB-Blaster connector on the DE2-115 Board.
  • Confirm the board is powered up
  • Check the USB driver is seen in the Window's Device Manager utility

Do the switches and push buttons need an anti-bouncing VHDL/Verilog module?[edit]


How to set to 'Z' the unused I/Os?[edit]


--Cristian A (talk) 19:12, 2 August 2018 (UTC)